Amazone Catros 7003-2TX, Руководство по эксплуатации

Страница: 112 / 122

Cleaning, maintenance and repairs
112 Catros-2TX BAG0159.8 02.20
12.8 Tyres/wheels
• Check chassis wheels regularly for damage and firm seating on
the wheel rim.
•
Required tyre pressure.
ο
Running gear tyre: 2,7 bar
ο Support wheels:
2,5 bar
•
Required tightening torque for wheel nuts or bolts:
ο
Running gear tyres 600 Nm
ο Support wheels 270 Nm
• Regularly check
ο
that wheel nuts are firmly seated.
ο tyre pressures.
• Only use the tyres and wheels which we have specified.
•
Repair work on tyres must only be carried out by specialists
using suitable assembly tools.
• Tyre fitting requires sufficient skills and proper assembly tools.
•
Use the jack only at the jacking points indicated.
12.8.1 Tyreinflation pressure
Inflate the tyres with the indicated nominal pressure.
• The value for the nominal pressure can be read on the rim.
•
The value for the nominal pressure can be obtained from the tyre
manufacturer.
•
Check tyre pressures regularly when the tyres are cold, i.e. be-
fore starting a run.
• The difference in pressure between the tyres on one axle must
be no greater than 0.1 bar.
•
Tyre pressure can be raised by up to 1 bar after a fast run or in
warm weather. Tyre pressure should on no account be reduced
as it is then too low when the tyres cool down.