7.4.1.3 Adjusting the working depth of the side discs
The working depth of the side discs is adjusted to
prevent the formation of soil ridges during operation.
1.
Raise the implement.
2.
Loosen both bolts
1
.
The bearing journal and the hub of the side disc
serve as handles.
3.
Turn the side disc up or down in the elongated
slots.
4.
Tighten the bolts.
11
CMS-I-00003202
7.4.2 Adjusting the working depth of the crushboard
7.4.2.1 Manually adjust the working depth of the crushboard
1.
Remove the linch pin
1
.
2.
Use the crank
2
to change the working depth.
3.
Read the working depth on the read-off edge
3
of the scale
4
.
4.
When the desired working depth has been set,
secure the crank with a linch pin.
2
4
3
1
CMS-I-00002053
7.4.2.2 Hydraulic adjustment of the crushboard working depth
The arrow
1
on the scale
2
shows the set working
depth.
NOTE
The scale value only serves for orientation. The
scale value does not represent the working depth
in centimetres.
Adjust the working depth hydraulically using the
"beige" tractor control unit.
1
2
CMS-I-00003620
CMS-T-00004428-B.1
CMS-T-00006863-A.1
CMS-T-00002259-D.1
CMS-T-00006864-A.1
7 | Using the machine
Adjusting the working depth
MG6828-EN-II | N.1 | 13.08.2021
62
