Amazone Catros 4001-2TS Скачать руководство пользователя страница 60

Страница: 60 / 90

Coupling and uncoupling the machine

WARNING

Risk of contusions, cutting, catching, drawing in and knocks
when the machine unexpectedly releases from the tractor!

•

Use the intended equipment to connect the tractor and the ma-

chine in the proper way.

•

When coupling the machine to the tractor's three-point hydraulic

system, ensure that the attachment categories of the tractor and

the machine are the same.

Be absolutely certain to upgrade the category II upper and lower

link pins of the machine to category III using reducing sleeves if

your tractor has a category III three-point linkage.

•

Only use the upper and lower link pins provided for coupling the

machine.

•

Visually check the upper and lower link pins for obvious defects

whenever the machine is coupled. Replace upper and lower link

pins if there are clear signs of wear.

•

Use a lynch pin on each of the upper and lower link pins in the

pivot points on the three-point frame attachment to secure them

against unintentional release.

WARNING

Risk of energy supply failure between the tractor and the ma-
chine through damaged power lines!

During coupling, check the course of the power lines. The power lines

•

must give slightly without tension, bending or rubbing on all

movements of the connected machine.

•

may not scour other parts.

1. Fit the ball sleeves over the lower link pins of the machine.
2. Secure each of the lower link pins with lynch pins to ensure that

they do not accidentally become loose.

3. Direct people out of the danger area between the tractor and

machine before you approach the machine with the tractor.

4. First connect the supply lines before coupling the machine and

the tractor.
4.1 Drive the tractor up to the machine to leave a clearance of

approximately 25 cm between tractor and machine.

4.2 Secure the tractor against unintentional starting and unin-

tentional rolling away.

4.3 Connect the supply lines to the tractor.
4.4 Position the lower link hooks so that they are aligned with

the lower linking points on the machine.

5. Now, reverse the tractor all the way to the machine so that the

lower link hooks of the tractor automatically pick up the ball

sleeves of the lower attachment points of the machine.

→

The lower link hooks lock automatically.

Catros BAG0081.10 09.14

Содержание Catros 4001-2TS



























































































Результаты поиска

Содержание Catros 4001-2TS

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 4001-2TS, Руководство по эксплуатации

Результаты поиска

Содержание Catros 4001-2TS

Отзывы:

Бренды по названию

Популярные бренды