Amazone Catros 4001-2TS Скачать руководство пользователя страница 12

Страница: 12 / 90

General safety instructions

2.3

Organisational measures

The operator must provide the necessary personal protective equip-

ment, such as:

•

Protective glasses

•

Protective shoes

•

Protective suit

•

Skin protection, etc.

The operation manual

•

Must always be kept at the place at which the machine is oper-

ated.

•

Must always be easily accessible for the user and maintenance

personnel.

Check all the available safety equipment regularly.

2.4

Safety and protection equipment

Before each commissioning of the machine, all the safety and protec-

tion equipment must be properly attached and fully functional. Check

all the safety and protection equipment regularly.

Faulty safety equipment

Faulty or disassembled safety and protection equipment can lead to

dangerous situations.

2.5

Informal safety measures

As well as all the safety information in this operating manual, comply

with the general, national regulations pertaining to accident prevention

and environmental protection.
When driving on public roads and routes, then you should comply with

the statutory road traffic regulations.

Catros BAG0081.10 09.14

Содержание Catros 4001-2TS



























































































Результаты поиска

Содержание Catros 4001-2TS

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 4001-2TS, Руководство по эксплуатации

Результаты поиска

Содержание Catros 4001-2TS

Отзывы:

Бренды по названию

Популярные бренды