en
Safety instructions
14
Kontrollvorrichtung BAG0146.2 02.16
3
Safety instructions
•
The VK70181000 may only be used or operated by personnel
instructed according to this document.
•
The foreman of quality assurance is responsible for the instruct-
ing.
•
The accident prevention guidelines BGV B2 must be observed.
(see Appendix). On the VK70181000, a Class 2 laser with
p=1mW and
ʎ
=650nm was used
.
•
Never look into the laser beam or direct towards persons.
•
During operation of the control device, great care must be taken
to ensure that the laser beam is directed such a manner that no
persons or animals are standing in the projection range.
Unintentionally reflecting beams may also not reach areas
where persons may be standing. (mirroring).
4
Accident prevention
Work step
Description
Before using the control de-
vice
•
Check the control device for damage
(visual check)
During installation
•
While installing the device, not paying attention may lead to
crushing injuries to your hands.
During the inspection
•
When inspecting, it is necessary to be careful with the laser
beam (see BGV B2).
Always first install the device on the roller and then switch on the
laser.
During transport
•
During transport, it is necessary to be careful with the sensitive
laser device.
During repairs
•
No known risks
During decommissioning
•
No known risks
