6
Circuit breaker
DO NOT OVERLOAD
the product’s outlets. The product can accommodate
a total equipment load of up to 15 A (1800 W) (whether plugged into a single
outlet or spread out over multiple outlets). If the load exceeds 1800 W, the
built-in circuit breaker (A) trips. All outlets and USB ports stop providing power.
In case the circuit breaker trips, proceed as below:
1. Unplug all the connected equipment.
2. Set the power switch (A) to
RESET
position.
3. Connect all the equipment one by one. While doing so, do not exceed a total load of 1800 W.
Adjusting the rotating outlets
B
90°
-90°
0°
Cleaning and Maintenance
Risk of electric shock!
To prevent electric shock, unplug before cleaning.
Risk of electric shock!
During cleaning do not immerse the electrical parts
of the product in water or other liquids. Never hold the product under running
water.
Cleaning
• To clean, wipe with a soft, slightly moist cloth.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to
clean the product.
Maintenance
• Store in a cool and dry place away from children and pets, ideally in original packaging.
• Avoid any vibrations and shocks.
NOTICE
WARNING
WARNING
