3
English
Français
Deutsch
Italiano
Español
Instructions
Step 1:
Setup
• Attach the top part of the blind first. Then continue around the corner and
down the sides and end with the bottom part.
Step 2:
Setup
• Use the hook-and-loop fasteners to close the gaps.
Step 3:
Removal
•
Attention:
Do not pull the blind directly for this may cause the product itself
and the glass window to be seriously damaged.
• Pull on the tab of each suction cup to let air in and release the suction. (see
illustration above).
Tips
• Before attaching the blind, clean the window with soap and water and check
that the surface of the window is perfectly clean.
• The suction power is reduced if foreign particles are trapped between the
suction cups and the glass surface, e.g. dirt, dust, humidity etc…
• The presence of grease (airborne or by contact) may prevent the cups from
adhering securely to the glass. It may be necessary to use a stronger cleaning
agent to remove this layer of grease before attaching the blinds.
• Both the suction cups and window must be clean and dry before attaching the
blind.
B071YVLK63-Blackout Blind QuickGuide-V02 (EU).indb 3
10/17/17 10:36 AM
