4
EN
CAUTION
Risk of damage!
The clamps
are breakable. Avoid dropping the product else,
measurements in ampere become unreliable.
• This product must be used by trained users
only.
• Do not exceed the maximum allowable input
range of any measurement mode.
Mode
Maximum Input
A
~
, A
600 A
~
/
V
~
, V
1000 V
~
/
Resistance,
Capacitance,
Frequency, Diode
Test, Temperature.
300 V
~
/
• Do not measure current on a CAT II circuitry
whose voltage exceeds 1000 V.
• Do not measure current on a CAT III circuitry
whose voltage exceeds 600 V.
• When measuring volts, do not switch to
current/resistance modes.
• Set the function switch to the appropriate
position before measuring.
• Set the function switch (K) to the
OFF
position
when not in use.
