Amazfit A1975, Руководство пользователя, Страница: 26 / 36

25
Running belt slipping and correction 2.
2.1 Start the treadmill and make it run at a speed of 6-8 km/h. Stand behind the treadmill and be ready for adjustment.
2.2 Open the protective storage cover in the left rear corner and take out the wrench, as shown in Figure A.
2.3 If the treadmill tilts to the right: Turn the right adjusting screw clockwise half a turn, as shown in Figure B below.
2.4 If the treadmill tilts to the left: Turn the left adjusting screw clockwise half a turn, as shown in Figure B below.
2.5 If the treadmill slips: If you find that the running belt is loose, turn the adjusting screws on the left and right sides
clockwise half a turn, as shown in Figure D below.
2.6 Make the treadmill run for about 1-2 minutes, and check whether the running belt is centered. If not, adjust it again.
C
A
B
D