Amazfit A1975, Руководство пользователя

Страница: 23 / 36

2. Lubricate the running belt
2.1 Shut down the treadmill and disconnect the treadmill power cable.
2.2 Open the protective storage cover in the rear right corner and pull out the oil bottle, as shown in Figure A below.
2.3 Lift the edge of the running belt and apply silicone oil to the inner surface, as shown in Figure B below.
2.4 Reconnect the treadmill power supply.
2.5 Turn on the treadmill and make it run at 4 km/h for about 10 to 20 seconds.
2.6 Use 5-10 ml of silicone oil during each lubrication. Too much silicone oil may cause slippage and affect the
normal use of the treadmill.
2.7 When the treadmill needs to be refueled, the reminder OIL flashes in the heart rate display window and a
refueling reminder is also displayed on the APP. After you press the Start button to start workout, the reminder
disappears after the power is turned on. The reminder is displayed again upon next power-on. After refueling,
press and hold the speed + button for 3s to clear the reminder, or clear the refueling reminder through the APP.
A
B
22