v5.2
page 7
OPERATING REQUREMENTS AND CONDITIONS
The design of Border Router complies with FCC and IC safety levels of radio frequency exposure for mobile devices.
MOBILE DEVICE RF EXPOSURE STATEMENT
RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm of separation distance be-
tween the Border Router device and the user’s body must be maintained at all times.
CAUTION STATEMENT FOR MODIFICATIONS
CAUTION: Any changes or modifications not expressly approved by Amatis Controls, LLC could void the user’s
authority to operate the equipment.
FCC NOTICES
Border Router has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-
ing Border Router off and on the user is encouraged to try to correct the interference by one or more of the following
measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer for help.
OEM LABELING REQUIREMENTS
WARNING! The Original Equipment Manufacturer (OEM) must ensure that FCC/IC labeling requirements are met. This
includes a clearly visible label on the outside of the final product enclosure that displays the contents shown below.
FCC:
Contains FCC ID: 2ADDY-BR1
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation
IC:
Contains Model Border Router, IC:20256-BR1
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the
device
Agency certifications
