Amate Audio Nitid S12W, Руководство пользователя

Страница: 10 / 21

NITID S12W Dec 2022
10
Amate Audio
Fig. 9. S12W socket
6. TROUBLESHOOTING
System not powering up

If the screen does not light up:
- Check that the PowerCon cable is correctly inserted and turned until the
“click”,
- Check that the AC mains is between the rated AC (85 to 265 VAC)
- If AC is correct, the power module might need servicing. Contact support.

If the screen lights up, but remains with the Amate Audio logo, the DSP board
might need servicing. Contact support.
No output sound

Check in the screen that the input bar shows level being received by the system. If
not, check your cabling and sound sources.

Check that the signal cables are in good condition and connected at both ends

The mixer output level must not be at minimum.

Check that the mixer channel is not muted.

Check that the system is not in MUTE or STANDBY (click the thermometer icon
and read the “Status” value) not lit. If yes, go inside the menu using the touchscreen
and deactivate them:
- To disable the Standby go to SETUP and select PWR ON in the ECO button.
- To disable the MUTE push the icon with a loudspeaker.

Check that the system GAIN is not set to the minimum. To do that, go to the
AUDIO setting using the touchscreen, select GAIN and move the slider to the 0 dB
position.
Distorted output signal

The system is being saturated with a very high input signal, frequently caused by
the same mixer. Check the output level or mixer gain channels.