Amate Audio NITID N12A6, Руководство пользователя

Страница: 8 / 24

NITID N12A6 Jul 2022
8
Amate Audio
3.2. N12A6 with subwoofer
The N12A6 is equipped with a 35 mm socket for mounting the
speaker on a subwoofer. Be careful not to use this system on
non-flat surfaces as it may become unstable.
Fig. 5.
N12A6 with subwoofer
3.3. Asymmetrical and rotatable horns
The N12A6 incorporates an asymmetrical dispersion horn which will optimise
coverage.
To rotate the horn, unscrew the frontal grille, and then, unscrew the four fixing
screws of the horn. Rotate it 180 degrees taking care of the wires. Screw the horn
again and finally place the frontal grille in its right position.
Good coverage of audiences often is a conflicting combination of:

wide coverage for the closest audience (short throw)

narrow coverage for distant areas (long throw)
The asymmetrical dispersion horn coverage varies from "short throw" to "long throw"
along the vertical axis (keeping a constant vertical directivity). In conclusion,
directivity feature of (50º to 100º(H), 55º(V)) can be seen as if the horn itself had
"two" horizontal directivities, which depend on the distance. For short distances the
horn should be used with its "wide" dispersion (100º). For long distances the horn
should be used with its "narrow" dispersion (50º). We suggest you to pay attention
to the following examples.
3.3.1. Vertical-Positioned Cabinets (Flown and aiming to the audience)
We need wide coverage (100º) for the closest listeners and narrow coverage for the
distant audience.