Remote
Remote
Remote
Remote Control
Control
Control
Control
Power
Power
Power
Power switch
switch
switch
switch
Plug in power cord; the fireplace is now on standby mode. Press the power button once, the
indicator lights up, Enjoy the view of the simulated charcoal lighting up and small flames in dancing
tempo.Press the same power button again and the flames go off.The Fireplace is on standby mode again.Do
not switch on fireplace when air outlets are blocked. Pressing air in 10 seconds.
Heat
Heat
Heat
Heat Control
Control
Control
Control
Press this heat button once and indicator lights up. Ten seconds after the mechanism is
activated warm air of 750W will be produced through the air outlets at the bottom. Press the same button
again and the indieator lights up.The air outlets will produce hot air of 1500W Press the same button a third
time, and the mechanism stops functioning after blowing out the remaining air in 10seconds.
Simulated
Simulated
Simulated
Simulated flames
flames
flames
flames
Press either the
〝
+
〞
or
the
〝
-
〞
button, the indicator light will brighten up or dim the
flames.
Timer
Timer
Timer
Timer
This sets the timing for switching the fireplace off automatically. The timer’s duration ranges from
0.5 to7.5 hours. The lighting up shown on the LED indicator in dicates the setting of the gimer.
Remote
Remote
Remote
Remote Control
Control
Control
Control Device
Device
Device
Device
IIII
t is operated by AAA(#7)batteries. Point it directly towards the fireplace and it
functions within a distance of approx 3.5m. The functions are similar to that of the Control Panel.
Cleaning
Cleaning
Cleaning
Cleaning the
the
the
the exterior
exterior
exterior
exterior of
of
of
of the
the
the
the appliance
appliance
appliance
appliance
Before cleaning the appliance, disconnect it from the socket and leave to cool.
You can clean the exterior of the heater with a soft, damp cloth.
Do not use cleaning or polishing products.
Manufacturers
Manufacturers
Manufacturers
Manufacturers guarantee
guarantee
guarantee
guarantee
There is guarantee of one year. During this period, faulty components will be repaired or replaced free of
charge, if the fault is due to a manufacturing defect.
In this case, consult the retailer where you have purchased the appliance.
(Below some more instructions for the approved electro technician who carries out maintenance or repairs to
your heater):
Appliance comes with the following light bulbs:
WM-50
WM-50
WM-50
WM-50
four
40W light bulbs (max. 160W)
7
777