Amantii WM-50, Инструкция по установке и эксплуатации, Страница: 3 / 11

UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance
operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet.
【
Grounding
Grounding Grounding
Grounding Appliance
Appliance Appliance
Appliance
】
This appliance is for use on 120 Volts. The cord has a plug
as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot
receptacles. The green grounding lug extending from the
adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be
used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove
plug from outlet.
【 【 【 【
INSTALLATION
INSTALLATION
INSTALLATION INSTALLATION
】 】 】 】
CAUTION CAUTION CAUTION CAUTION
：
INSTALL THE BOTTOM OF THE HEATER NO LESS THAN 2 INCHES ABOVE THE FINISHED FLOOR.
1) Select a location that is not prone to moisture and is located at least 36" away from combustible
materials such as curtain drapes, furniture, bedding, paper, etc. then use a
￠
2.75 drill to drill the four holes
A,B,C,D and use the Hammer to thread the Bulged screw tube into the hole till it keep flat with the wall.
2 222