01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
MANUAL OPERATION
The fireplace operates either by the touch panel located on the left front top side of the fireplace or by supplied remote
control.
Ensure that the ON / OFF Power Switch on the fireplace is in the ON position.
1. Press “ ” to turn on and off the fireplace.
2. Press “ ” to adjust the flame brightness. There are 6 brightness levels
（
L6-L1
）
and an off(OF) position. Each
time the flame button is pressed, the brightness of the flame decrease.
Press the flame button more than 5 seconds, the timer indicator light on and will rapidly blinks, at this time, you can
use the TuyaSmart APP to connect to the fireplace.
3. Press “ ” to adjust the ember bed brightness. There are 7 brightness levels (d8-d2), dynamic condition(d1) ,and
the OFF(OF) setting you can cycle through. Each time the ember bed button is pressed, the brightness of the ember
bed decrease.
4. Press “ ” for the first time to display the current timing
，
press the button again to clear the current timing. If the
timing in off position, the second press will show 30. Multiple times to set operating duration to OF, 30 min, 1h, 2h, 3h,
4h, 5h, 6h, 7h, 8h.
Press and hold the “ ” for 5 seconds to turn on the sound.
5. Press “ ” for the first time to display the current setting temperature
，
press the button again to clear the current
temperature. If the heater in off position, the second press will show22
℃
(72
℉
). Multiple times to set ambient tempera-
tures at 22
℃
(72
℉
), 23
℃
(74
℉
),24
℃
(76
℉
), 25
℃
(78
℉
), 26
℃
(80
℉
), 27
℃
(82
℉
), 28
℃
(83
℉
),15
℃
(59
℉
), 16
℃
(60
℉
),
17
℃
(62
℉
),18
℃
(64
℉
), 19
℃
(66
℉
), 20
℃
(68
℉
), 21
℃
(70
℉
).
Temperature unit convert function: When the heater is on, press and hold the“ ” Button for 5 seconds, current
temperature unit display will convert to another temperature unit.
NOTE:The heater is turned on by switching on the fan first, then after 5 seconds the heating coil. The heater is turned
off by switching off the heating coil first, then after 30 seconds the fan.
Touch the control panel once to “wakes up” the controls. This will cause the controls to light up. At this time, you can
press the power button to turn on fireplace
