Amano PIX-95, Руководство по эксплуатации

Страница: 11 / 16

PIX-95 www.amano.com  1-800-253-9836
pg. 11
Error Messages
Error Code Cause
Home sensor, motor carriage stuck
Timing sensor, carriage stuck
Home sensor
Carriage stuck
General print error
Daylight Saving Time Program
For error messages through unplug the clock before checking to see
that the carriage is not stuck or jammed. Also, check to see that the ribbon
cables are in good condition. After clearing any jams, unplug the clock, then plug
it back in. Contact us at 1-800-253-9836 if you need assistance.
The error message signifies that an attempt was made to get into the
Program mode during the Daylight saving changeover one-hour lockout. Wait
one hour and you will be able to program the clock.
Cleaning
Do not use any chemical solvents or oils to clean or lubricate your PIX-95. This
will damage your clock.
To clean the inside of your clock, blow it out with air.
Resetting Clock After Extended Loss of Power
If there has been a power interruption of duration sufficient to drain the internal
lithium battery, the date setting, the clock setting and the Daylight Saving Time
setting will each need to be reset.