Amano Pioneer Eclipse PE250AP, Руководство оператора, Страница: 11 / 20

11
• Do not operate in conditions over 90% relative humidity
• Do not place obstructions around the appliance that would impede air flow.
• Use only indoors and in a clean environment.
• UV-C bulbs are fragile. Handle with care.
• Keep machine clean and in good operating condition.
• Have machine checked periodically by an authorized service center.
• Use only factory authorized parts for maintenance or service.
• Store machine carefully in dry area.
• For optimum drying performance and safety, study and follow your operators manual.
For Best Performance
Trouble Shooting
Problem Possible Cause Solution
Appliance will not start
No power
Check the main power supply (building circuit breaker)
Check the circuit breaker on the base
Check the GFCI
Bad connection
Check the cord connection at the wall outlet
Check the interconnect cord between the base and the filter cover
Defective switch Contact an authorized APEC distributor
Fan motor operates but
UV lights do not illuminate
Bad connection Check the interconnect cord between the base and the filter cover
No bulbs Device is shipped without bulbs installed. Make sure bulbs are properly installed
Failed bulbs Replace bulbs
Failed internal harness Contact an authorized APEC distributor
Appliance is producing
an odor
Pre-filter contaminated Replace pre-filter
Light filter has degraded Replace light filter
Bulb has failed Replace bulb(s)
Floor is fading under
appliance
Light filter is missing Replace light filter
Light filter has degraded Replace light filter