MTX-30P Push Installation & Operation Guide
Page 12
View Previous Punch at the Terminal – F3
Press the F3 key to view Previous Punch. The terminal will ask for your User ID.
Use the keypad to enter your numeric ID and then press OK.
Then use the keypad to enter your password and press OK.
The display screen will show your previous punches.
Note: Previous punches are reset (cleared) every time the clock is polled.
Two Ways to Enroll
After installing the MTX-30P Push proximity card terminal and
powering on, you may begin enrolling users. If this is the first
enrollment in a new or empty clock system, everyone will be able to
enroll. However, if there are any users with privileges already setup
in the system, you will have to be enrolled by a user with privileges.
The MTX-30P Push proximity card reader provides the following two
methods for enrollment:
•
Password
•
Proximity Card
Note: Use care when enrolling users at the terminal as the ESC
button can alter the entry functions during some operations.
There are three types of users:
•
Normal User
•
Registrar
•
Super Admin
Enrolling Users