6
Usage
Oven Signal
Oven features entry and end-of-cycle signal
programmed on at factory. Signal can be
deactivated. Entry signal sounds whenever a pad is
pressed. It confirms oven has read and accepted
instruction. End-of-cycle signal sounds at end of
cooking time or when food reaches set temperature.
To cancel entry signal or end-of-cycle signal:
1. Press and hold
MEMORY SET
for 5 seconds.
"OP:10" or "OP:11" displays. See chart at right
for definition of signal options.
2. To change signal option, press
0
to deactivate
entry signal. Press
1
to activate entry signal.
3. Press
MEMORY SET
. "OP:20" or "OP:21"
displays. If desired, change signal option for
end-of-cycle signal.
4. Advance to next signal option by pressing
MEMORY SET
.
5. To exit signal option mode, press
STOP/RESET
once.
in door or dents inside oven cavity.
·Report any dents or breakage to source of
purchase immediately. Do not attempt to use oven
if damaged.
·Remove all materials from oven interior.
·If oven has been stored in extremely cold area,
wait a few hours before plugging in.
airflow restricted. Oven must have sufficient airflow
around it. To build in this Microwave Oven, use only
Amana model "RS" trim kits that have a label
identifying which Amana Microwave Oven Model
may be used. Trim kits can be purchased from
Amana dealer.
Option
Number
Option Function
OP:10
Prevents signal from sounding when a
pad is pressed.
OP:11*
Allows signal to sound when a pad is
pressed.
OP:20
Prevents end-of-cycle signal from
sounding when heating time is over.
OP:21*
Allows signal to sound at end of
heating time and timer cycle.
*As shipped from factory.