4
Block Sensor Test
Lefthand Figure shows the number of blocks read (26), while the righthand figure shows the maximum
(40) and minimum (34) value for block darkness.
Timing Sensor Test
This test verifies the functioning of the Timing Sensor which monitors the motion of the Time Card in
the clock.
Note:
The Card Sensor must be functioning in order to run this test.
1. Enter the Program Mode. Press the
Function
key until menu 8
appears.
2. Press
the
Change
key 15 times until menu item 16 is displayed.
3. Press
the
Enter
key to start the test.
4. Insert a Time Card into the throat and gently move it up and down.
The number on the right side of the display will count from “0001” through
“9999” and then start over as the card is moved.
5. Remove the card when finished and exit Program Mode.