background image

24

TO QUALIFY FOR THIS WARRANTY

(1) Machine must be registered within 30 days from the time 

of purchase on a form provided by American Sanders. 

Your American Sanders Distributor is responsible for the 

registration of your machine. Please cooperate with your 

Distributor in supplying necessary information on the card.

(2) The machine must have been purchased from American 

Sanders or an authorized American Sanders Distributor.

(3) This warranty extends to the original purchaser only and is 

not transferable to subsequent owners.

TIME PERIODS

ONE (1) YEAR WARRANTY - For the EZ-Sand.

Warranted to be free from defects in material and 

workmanship for a period of one (1) year from the date of 

purchase by the original owners. (See Exclusions)

EXCLUSIONS (Not Covered by Warranty)

(1) Expendable wear items and parts that fail through normal 

wear by reason of their characteristics (cords, pads, 

grip face, wheels, carbon motor brushes, filters, bags, 

bearings, or other consumable parts).

(2) This warranty does not extend to parts affected by misuse, 

neglect, abuse, accidents, damage in transit, overloading 

the capacity of the machine, failure due to lack of proper 

maintenance or care as described in the operating and 

maintenance instructions. All defective parts must be 

returned to the distributor for credit.

(3)  Minor adjustments, such as tightening of screws or bolts 

not connected with the replacement of parts, are not 

covered.

(4)  Repairs or alterations by an organization other than the 

factory or an Authorized Service Center are not covered 

and will void any American Sanders warranty as to the 

parts or systems repaired or altered by a non-authorized 

organization.

THE OBLIGATION OF AMERICAN SANDERS

(1)  The obligation of American Sanders under this warranty 

is limited to repairing or replacing, at its option, any part 

which is proven to be defective in material or workmanship 

under normal use for the applicable period stated above.

(2) Warranty repairs will be made by your American Sanders 

Distributor without charge for parts and labor. They will 

be compensated with a warranty labor rate of $45.00 per 

hour, for the first year of ownership.

(3) Parts repaired or replaced under this warranty are 

warranted only during the balance of the original warranty 

period. All defective parts replaced under these warranties 

become the property of American Sanders.

WARRANTY SERVICE

To obtain warranty service, take your machine and proof of 

purchase to any authorized American Sander Distributor.  

American Sanders will not reimburse expenses for service 

calls or travel. For the Distributor in your area, call American 

Sanders Customer Service Department at 800-367-3550 

or 336-372-8080. If you are dissatisfied with the service 

that you receive, call or write American Sanders Customer 

Service Department for further assistance.

INSTRUCTIONS AND CONDITIONS FOR WARRANTY 

REIMBURSEMENT

Order replacement part: Orders will be processed and 

charged, as normal procedure.

Call American Sanders for R/A number.

You will need the Machine Serial Number and the 

Machine Model Number.

Parts must be returned, accompanied with the R/A 

number to be eligible for warranty credit.

All Warranty Parts will be shipped prepaid UPS Ground, 

any other method will be at the recipients expense.

Freight on any Warranty Part after 30 days must be paid 

for by the Purchaser.

Warranty labor rate is $45.00 per hour.

Credit will be issued upon completion of the above steps, 

at the above rates.

Transportation  of  hazardous  waste  or  contaminated 

equipment is subject to various laws and regulations.  In 

returning machines, parts, or accessories under this limited 

warranty, the end user must certify in writing that the 

machines, parts, or accessories being returned have not 

been  used  for  handling,  clean  up,  or  disposal  of  hazardous 

waste or hazardous materials including but not limited to such 

things as asbestos, anthrax etc. or if the machines, parts, 

or accessories being returned have been used for handling, 

clean  up,  or  diposal  of  hazardous  waste  or  hazardous 

materials, then the end user must have the machines, parts 

or  accessories  decontaminated  by  licensed  and  qualified 

decontamination professionals and provide written certification 

of this decontamination signed by the decontamination 

professionals.  These machines, parts or accessories are to 

be returned only to the local American Sanders Service Center 

for warranty service along with decontamination certification.

DISCLAIMER OF CONSEQUENTIAL

THERE ARE NO WARRANTIES THAT EXTEND BEYOND 

THE  DESCRIPTION  OF  THE  LIMITED  WARRANTIES 

STATED WITHIN.  NO OTHER WARRANTY, EXPRESSED 

OR  IMPLIED,  INCLUDING  BUT  NOT  LIMITED  TO  ANY 

IMPLIED  WARRANTY  OF  MERCHANTABLILITY  OR 

FITNESS FOR A PARTICULAR PURPOSE, IS MADE EXCEPT 

AS  EXPRESSLY  STATED  HEREIN.    ANY  STATUTORY 

IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF 

MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR 

PURPOSE,  THAT  ARE  IMPOSED  BY  LAW  DESPITE  THE 

EXPRESS  LIMITATION  OR  WARRANTIES  ABOVE,  ARE 

EXPRESSLY LIMITED TO THE DURATION OF THE WRITTEN 

WARRANTY.    BUYER  UNDERSTANDS, ACKNOWLEDGES 

AND AGREES THAT THE REMEDIES PROVIDED 

UNDER  THIS  LIMITED  WARRANTY ARE  THE  SOLE AND 

EXCLUSIVE  REMEDIES  AVAILABLE  TO  THE  BUYER.  

AMERICAN  SANDERS  DISCLAIMS ANY  RESPONSIBLITY 

FOR  LOSS  OF  USER  TIME  OF  THE  AMERICAN 

SANDERS  MACHINE  OR    ANY  OTHER  INCIDENTAL  OR 

CONSEQUENTIAL DAMAGES. THIS INCLUDES, BUT NOT 

LIMITED  TO  INDIRECT,  SPECIAL  OR  CONSEQUENTIAL 

DAMAGES ARISING OUT OF OR IN CONNECTION 

WITH THE FURNISHING, PERFORMANCE, USE OF OR 

INABILITY  TO  USE  THE  MACHINE.    ANY  EXTENSIONS 

OF OR MODIFICATIONS MADE TO THIS WARRANTY BY A 

DEALER/DISTRIBUTOR OF AMERICAN SANDERS ARE THE 

SOLE  RESPONSIBILITY  OF THE  DEALER/DISTRIBUTOR.

American Sanders reserves the right 

to change its warranty policy without 

notice.

Copyright 2018 American Sanders

Limited Warranty

American 8

Содержание American Sanders American 8





























Отзывы: