7
EN
INFORMATION
It is essential that any adapters (71 mm/ 98 mm) have been removed from
the blank holder before fitting the calibration body.
The calibration body is a highly precise measuring instrument. When fitting it
is essential that the calibration body rests fully on the base of the holder.
We recommended fitting the calibration body by hand to avoid tilting it.
STEP 4
Remove tool T1 and insert calibration pin.
Ensure that the round end faces towards the
blank holder.
STEP 5
Calibration is now performed.
STEP 6
Following successful calibration, the machine
can be returned to the initial state in the follo-
wing steps.
