Copyright 2008 The Amanda Company, All Rights Reserved
8
of
48
Chapter 4: Running the Vdex Quick Start Wizard
To run the Vdex Quick Start Wizard, open a web browser and set the web address to
the
IP address assigned to Vdex. For example, if you’ve assigned IP address 192.168.1.99,
you would enter
http://192.168.1.99/wizard
into your web browser and press enter to
start the wizard. If attempting to connect to the Vdex’s default IP address you must make
sure your network configuration uses a 192.168.0.x IP scheme and then you would point
your browser to
http://192.168.0.157/wizard
to run the Vdex Wizard.
Using the Vdex Wizard you can change the IP address, network mask, assign the
gateway IP address, DNS settings, SMTP server, and email from account to be used by
the Vdex system (when sending voicemail to email). You can also change the
administrator password. Figures 1, 2, 3 and 4 show the Vdex Wizard screens and what
can be done on each screen in more detail.
Step 1: Network Configuration
On the first step (figure 1) set the IP address, subnet mask and gateway IP to be used by
the Vdex system. Write them down for future reference and click continue to go onto the
next step.
Vdex IP Address
_____________________
Vdex Network Mask
_____________________
Gateway
_____________________
Figure 1
