•
Intercom as its prime line
•
No paging features enabled
Each Norstar port connected to Amanda may have a name (such as AMANDA1)
which will allow station set users to recognize calls from Amanda. As discussed
below, your installation will be much easier if you do NOT change the default
names for the CO lines. Naming the user extensions will not affect Amanda’s
integration at all.
3.3
Hands Free
For integration between the Norstar system and the Amanda system to work
properly, all of the station sets on the Norstar that are connected to Amanda
must be configured with Hands Free Answerback set to No. On the other hand,
Full handsfree and Auto handsfree should be set to Yes, again on all the lines
connected to Amanda ports.
3.4
Set Relocation
The Set Relocation feature must be disabled. This seemingly harmless feature
can cause unpredictable results for Amanda when it is enabled.
3.5
Dialing Filters
After Amanda is up and running, use the Norstar systems Dialing filters to
restrict the station ports used by Amanda as tightly as possible. This restric-
tion (consistent with your call processing applications) prevents possible long
distance toll fraud.
3.6
DNs and the Hunt Group
Be aware that:
•
All DNs connected to Amanda must be in consecutive order (for example,
41, 42, 43, and 44).
•
The last port connected to Amanda should forward on busy to the first
port connected to Amanda.
3
