15
Dry Erase Board
(on some models)
Your Amana
®
JOT™ refrigerator is equipped with a special
technology (Dry Erase) on the door’s surface, which allows you to
draw and write on it and erase easily; to keep the refrigerator
door in good condition, it is necessary to follow the instructions
below:
IMPORTANT: Only the metal surface of the door is prepared with
the Dry Erase technology, which is why the markers should not
be used on any plastic parts or on the sides of the refrigerator. If
markers are used by mistake on plastic parts or on the side of the
refrigerator, it is recommended to clean immediately with liquid
dish detergent and water. For assistance in case of prolonged
exposure to the marker’s ink, please visit our website at
www.amana.com or call the Amana Appliance Customer
Service toll free number at 1-800-843-0304. In Canada, visit our
website at www.amanacanada.ca or call us at 1-800-807-6777.
1. Remove the marker kit, which is included inside your
refrigerator, and place them horizontally somewhere in your
kitchen.
2. For best results, use Crayola brand dry erase markers in
these recommended colors: black, blue, purple, orange,
yellow or brown. Do not use red or green. Always use a
marker designed for dry erase surfaces.
IMPORTANT: Do not use permanent markers.
3. The included markers are designed to be erased without
water. The marker’s ink can be removed easily without water
with a cotton cloth or, in its absence, with a sponge,
detergent and water. If there is any ink residue left from
prolonged exposure, clean with liquid dish detergent and
water.
4. Always use marker on the refrigerator’s clean surface (free of
grease and dirt.) For cleaning and care of your refrigerator,
you should clean the ink residues from the markers at least
once a month.
Changing the Light Bulbs
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to
replace the bulb with one of the same size, shape, and wattage.
Refrigerator Light
1. Unplug refrigerator or disconnect power.
2. Reach behind the control panel and unscrew the bulb.
3. Replace the bulb with a 40-watt appliance bulb.
4. Plug in refrigerator or reconnect power.
Freezer Light
1. Unplug refrigerator or disconnect power.
2. Remove the freezer shelf.
3. Remove the freezer light shield by pushing down.
4. Remove the light bulb and replace with one of the same size,
shape and wattage.
5. Replace the light shield.
6. Plug in refrigerator or reconnect power.
Power Interruptions
If the power will be out for 24 hours or less, keep the door or
doors closed (depending on your model) to help food stay cold
and frozen.
If the power will be out for more than 24 hours, do one of the
following:
■
Remove all frozen food and store it in a frozen food locker.
■
Place 2 lbs (907 g) of dry ice in the freezer for every cubic foot
(28 L) of freezer space. This will keep the food frozen for 2 to
4 days.
■
If neither a food locker nor dry ice is available, consume or
can perishable food at once.
REMEMBER: A full freezer stays cold longer than a partially filled
one. A freezer full of meat stays cold longer than a freezer full of
baked goods. If you see that food contains ice crystals, it may be
refrozen, although the quality and flavor may be affected. If the
condition of the food is poor, dispose of it.
Vacation and Moving Care
Vacations
If You Choose to Leave the Refrigerator On While You’re
Away:
1. Use up any perishables and freeze other items.
2. If your refrigerator has an automatic ice maker:
■
Raise wire shutoff arm to OFF (up) position or move the
switch to the OFF (right) setting.
■
Shut off water supply to the ice maker.
3. Empty the ice bin.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
