ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation
to know the product better than the customer. This
includes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize
yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during
installation or repair it is possible to place yourself
in a position which is more hazardous than when
the unit is in operation.
Remember, it is your responsibility to install the
product safely and to know it well enough to be
able to instruct a customer in its safe use.
Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual
are intended as supplemental to existing practices.
However, if there is a direct conflict between existing
practices and the content of this manual, the
precautions listed here take precedence.
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
Goodman Company, L.P.
1810 Wilson Parkway • Fayetteville, Tennessee 37334
www.amana-hac.com
(RHA**B*D/VHA**B*A)
Remote Heat Pump
January 2003
Table of Contents
Safety Instructions ............................................................. 2
General ................................................................................3
SHIPPING AND HANDLING ............................................................. 3
LOCATION AND CLEARANCES ...................................................... 3
ROOFTOP INSTALLATIONS ............................................................ 3
APPLICATION NOTE ........................................................................ 3
Refrigerant Piping .....................................................3
REFRIGERANT VAPOR AND LIQUID LINE SIZING ....................... 3
REFRIGERANT VAPOR AND LIQUID LINE ROUTING ................... 4
SWEAT CONNECTIONS AT THE UNIT ........................................... 4
Safe Refrigerant Handling ................................................. 4
LEAK TESTING ................................................................................. 5
ID COIL AND LINE SETS EVACUATION .......................................... 5
Step 1. Confirm Proper Pump And Gauge Operation .............. 5
Step 2. Evacuate Lines And Indoor Coil. ................................. 6
Electrical Connections ....................................................... 7
WIRING ............................................................................................. 7
System Startup ................................................................... 8
PRELIMINARY CHARGE ADJUSTMENT ......................................... 8
FINAL CHARGE ADJUSTMENT ....................................................... 8
Matching System ....................................................................... 8
AMANA-Approved Mix-Matched System Combinations ........... 8
ID COIL WITH EXPANSION VALVE ................................................. 8
ID COIL WITH ORIFICE .................................................................. 10
Troubleshooting ............................................................... 10
Defrost System ....................................................... 10
Installation Instructions
Affix this manual, Specification Sheet and Users
Information Manual adjacent to the unit.
R
C
R
C om fort. Q uality. Tru st.
Heating
®
&
Air Conditioning
Part No. 10845809 Rev. 1
Printed in USA
