15
Before Calling for Service
If oven does not operate:
• Confirm oven is plugged into dedicated circuit.
• Confirm oven is on grounded and polarized circuit.
(Contact electrician to confirm)
• Check fuse or circuit breaker.
If oven light does not work:
• Confirm light bulb is screwed in tightly.
• Confirm light bulb is not defective.
If oven malfunctions:
• Unplug oven, wait for 1 minute, and plug in oven.
If oven operates, but will not heat food:
• Place one cup cool water in oven. Heat for one minute.
If water temperature does not rise, oven is operating
incorrectly. Call for service.
WARNING
To avoid electrical shock which can cause severe
personal injury or death, do not remove outer case at
any time. Only authorized servicer should remove
outer case.
Cleaning Splatter Shield
Splatter shield keeps top of microwave oven cavity and
antenna from becoming soiled. Clean soil from shield
with damp cloth or clean with mild detergent and water.
Remove splatter shield for easy cleaning.
1.
Unplug oven before removing splatter shield to stop
antenna from rotating.
2.
Place fingers on front of shield, push forward, and
down.
• When removing and replacing splatter shield, be
careful not to bend antenna.
3.
Wash shield in hot, soapy water. Rinse and
dry thoroughly.
• Do not wash splatter shield in dishwasher.
• Do not use abrasive cleaners.
4.
Reinstall splatter shield by fitting tabs into slots at
top of oven cavity back. Lift and press front of shield
until shield snaps into place.
CAUTION
To avoid oven cavity damage, do not operate oven
without splatter shield in place. Arcing will damage
oven cavity and antenna when operated without shield
in place.
