Amana NTC3500FW0 Скачать руководство пользователя страница 16

16

Using Laundry Product Dispensers

NOTE: Do not add liquid laundry detergent, single-dose 

laundry packets, color-safe bleach, Oxi-type boosters, or 

fabric softener crystals to dispensers. They will not dispense 

correctly. Add to the basket prior to adding laundry.

4.

 

Add powdered HE detergent

IMPORTANT:

 Use only High Efficiency detergents. The 

package will be marked “HE” or “High Efficiency.” Low-water 

washing creates excessive sudsing with a regular non-HE 

detergent. Using regular detergent will likely result in longer 

cycle times and reduced rinsing performance. It may also 

result in component failures and noticeable mold or mildew. 

HE detergents are made to produce the right amount of 

suds for the best performance. Follow the manufacturer’s 

instructions to determine the amount of detergent to use. 

NOTES:

 

 

Use only powdered HE detergent in the detergent 

dispenser. Add liquid HE detergent or single-dose packets 

to the basket prior to adding laundry. 

 

See “Washer Maintenance” for information on 

recommended method of cleaning washer dispensers.

5.

   

Add liquid chlorine bleach  

to dispenser

Bleach will be dispensed automatically during the wash part  

of the cycle. Do not overfill, dilute, or use more than 1 cup  

(250 mL). Do not use color-safe bleach or Oxi products in  

the same cycle with liquid chlorine bleach.

6.

  

Add liquid fabric softener

Pour a measured amount of liquid fabric softener into 

dispenser; always follow manufacturer’s directions for correct 

amount of fabric softener based on your load size. Fabric 

Softener is added during rinse.

IMPORTANT:

 Do not overfill or dilute. Overfilling dispenser  

will cause fabric softener to immediately dispense into washer. 
It is normal for a small amount of water to remain in the 

dispenser at the end of a cycle.
NOTE: The fabric softener dispenser rotates around the wash 

basket and may not be in the same spot each time.

7.

 

Press POWER to turn on washer

Close the washer lid. Washer will not fill, agitate, or spin 

with the lid open. Make sure the dispenser drawer is closed 

completely; then press POWER to turn on the washer.

8.

 

Select LOAD size

Press the Load button to select the correct setting for  

your wash load and the type of fabric being washed.  

Choose a water level that allows the load to move freely  

for best fabric care. 

Содержание NTC3500FW0



























Отзывы: