Amana
®
Washer
Control Panel
FEATURE
FUNCTION
Infinite Water Level
Wash/Rinse Temperature
Auto.Temp. Control
E
NERGY
S
TAR
®
ATC
Extra Rinse Option
Soil Level/Time
Fabric Selection
Regular Cycle
Whites & Towels Cycle
Soak Only Option
Spin Only Option
Rinse & Spin Option
Power Off
Cycle Status Lights
Quick Wash Cycle
Ultra Handwash Cycle
Handwash Cycle
No Iron Cycle
Signal
Quick Faucet
Saves water and energy by allowing the consumer to use only the water they need by precisely matching water level to
load size. Water usage is rated at 15.5 gallons minimum fill to 39.5 gallons maximum fill.
Select the desired water temperature. Choose from Cold/Cold, ATC Cold/Cold, ATC Warm/Cold and ATC Hot/Cold.
Provides the optimal wash water temperature for cleaning. ATC Cold = 75° F, ATC Warm = 95° F.
Provides the optimal wash water temperature for cleaning. ATC Cold = 64° F, ATC Warm = 78° F, ATC Hot = 110° F.
An extra rinse is added to the end of the Regular, No Iron and Handwash cycles to more completely remove laundry
additives, suds, perfumes, etc.
Select the appropriate soil level for the type of load. Choose from Light, Normal and Heavy.
Select the appropriate fabric cycle for the type of load by turning the cycle selector dial until the indicator light by the
desired fabric selection is illuminated.
For most sturdy fabrics including cottons, linens and normally soiled garments needing maximum water extraction.
For sturdy fabrics and heavily-soiled whites needing maximum water extraction.
Provides approximately 33 minutes of alternating periods of soaking with brief agitation at slow speed.
Provides a spin to remove more water from the load.
Use for loads that need rinsing only or to add rinse-added fabric softener to a load.
To cancel the cycle and turn off the washer, turn the cycle selector dial to Power Off and push in the dial.
Indicator lights illuminate to show the status of the wash cycle.
For lightly-soiled or wrinkled garments needed quickly.
Provides extra-gentle, intermittent agitation and soak for wool, silk and other handwash-only fabrics.
For sheer fabrics, bras and lingerie needing slower agitation and spin speeds because of clothing construction.
For “wash and wear” and synthetic fabrics and lightly- to normally-soiled garments needing a slower spin speed to reduce
wrinkling.
The end-of-cycle signal will sound once when the cycle is completed. The end-of-cycle signal can be canceled by setting
the switch to Off.
Provides a flow of water when holding the switch in the On position.
NAV8805
1
4
5
6
7
8
2
9
10
11
12
Washer control panel features:
1
2
3
a
3
b
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
14
15
16
13
17
18
19
3
a
3
b
18
FOR TRAINING USE – DO NOT DISTRIBUTE
Summer 2005
