Amana DUCT MOUNT Скачать руководство пользователя страница 2

2

Important Information

Great pride and workmanship go into every Amana product to provide our Customers with the highest possible quality.
We realize, however, that during its lifetime the product may require service.  The information contained in this manual
is intended for use by a qualified Amana Service Technician who is familiar with the safety procedures required in the repair
and who is equipped with the proper tools and testing instruments.

WARNING

Repairs covered in this manual that are made by unqualified persons can result in hazards due to improper
assembly or adjustments subjecting inexperienced persons making such repairs to the risk of injury or electrical
shock which can be serious or even fatal.

CONSUMER INFORMATION LINE

AMANA TOLL FREE

1-877-254-4729 (U.S. only)

email us at: [email protected]

fax us at: (931) 438- 4362

(Not a technical assistance line for dealers.)

Outside the U.S., call 1-931-433-6101.

(Not a technical assistance line for dealers.)

Your telephone company will bill you for the call.

SHIPPING AND HANDLING

Units are securely packed in shipping containers approved by the International Safe Transit Association.  Check the carton
upon arrival for external damage.  If damage is found, file a request in writing for inspection by the carrier agent
immediately.  The carrier is responsible for making prompt inspection of damage and for a thorough investigation of each
claim. The distributor or manufacturer will not accept claims from dealers for transportation damage.  If no damage is
found, carefully remove all shipping material and properly dispose of it.
Keep the unit as upright as  possible.  Laying the unit on its side or top could cause equipment damage.

TO THE INSTALLER

Before installing this unit please read this manual and the Specification Sheet to
familiarize  yourself on the specific items which must be adhered to such as
maximum external static pressure to unit, air temperature rise, minimum or
maximum CFM and motor speed connections.

TO THE OWNER

It is important to complete the owner registration card and mail it immediately. This
will assist us in contacting you if any service or warranty information should
change in the future. When completing the registration card, be sure to include the
Model, Manufacturing and Serial Numbers, plus the installation date.
The warranty certificate is also supplied with the unit. Read the warranty carefully
and note what is covered. Keep the warranty certificate in a safe place so you can
find it if necessary.
If additional operating instructions are required, call the dealer where the
purchase was made. Keep this literature in a safe place for future reference.

In order to locate an authorized Amana service agency, please consult your telephone book or the dealer from whom you
purchased this product.  If you require further assistance, please contact:

IMPORTANT NOTE TO CUSTOMER

CAUTION

If you perform service on your own Amana product, you must assume responsibility for any personal injury or
property damage that may result.  Amana will not be responsible for any injury or property damage arising from
improper service and/or service procedures.

Содержание DUCT MOUNT





















Отзывы: