12
User Options
Follow the instructions below to customized the
microwave oven’s operation. End-of-cycle signal,
maximum heating time and other options can be changed
to meeting your cooking needs.
1.
Open oven door. Display shows “door”.
• If door is closed or
RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2.
Press and hold pad
1 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows “P”.
3.
Press hidden enable pad.
• Locate hidden enable pad to the immediate left and
slightly down from the
MENU 1 pad. Display shows
"OP:1X". "OP" represents optional program
mode. First number represents option number and
second number represents functions currently
selected for option.
4.
Press
START pad to advance to other options.
• See chart for function options.
5.
Press
STATUS pad to change option.
• Press
START to save changes.
6.
Repeat steps 4-5 to change additional options.
7.
Press hidden enable pad to return to programming
mode.
• Press
RESET pad or close oven door to exit
programming mode.
Option
Description
Code
End-of-cycle
signal tone
Off
OP:10
Continuous
tone*
OP:11
5 continuous
tones
OP:12
5 tones, 5 cycles
OP:13
Tone when pad
is pressed
Off
OP:20
On*
OP:21
Control panel
resets when
door is opened
Off*
OP:30
On
OP:31
End-of-cycle
signal
Loud*
OP:40
Medium
OP:41
User time limit
Off
OP:50
On*
OP:51
Modifying User Time Limits
A user defined time limit may be put on each set of
programs associated with each available menu pad. For
example, if the user time limit for MENU 1 is 30 minutes,
the total cook time of all available stages for a single
item/quantity program may not exceed 30 minutes.
1.
Complete steps 1-3 of "Changing Optional
Programs".
2.
Press desired menu pad to change. Current user
time limit displays. Display shows active menu.
3.
Press numbers to enter desired heating time limit.
Display shows new heating time limit.
4.
Press corresponding menu pad again to save time
limit. For example, if changing heating time limit for
MENU 1, press
MENU 1 pad.
5.
Press
RESET pad or close oven door to exit
programming mode.
