manualshive.com logo in svg

Amana AMV6177AAB, Руководство по обслуживанию, Страница: 4 / 48

Поделиться
Скачать
Amana AMV6177AAB Скачать руководство пользователя страница 4

1-1

Rated Power Consumption  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1500W maximum (Microwave oven only)
Microwave Output - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 950W (IEC60705)

Adjustable 95W through 950W, 10 steps

Frequency  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2450 MHz ± 50 MHz
Power Supply  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 120 VAC, 60 Hz
Rated Current  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13.5 Amp. (Microwave oven+Cook top lamps+Ventilation fan)
Magnetron Cooling  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Forced Air Cooling
Rectification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Rectification Voltage Double Half-Wave
Door Sealing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Choke System
Safety Devices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Magnetron Thermal Fuse:

Open at 150°C ± 6°C

Oven Cavity Thermostat:

Open at 145°C ± 6°C

Fuse(20A)
Primary Interlock Switch
Secondary Interlock Switch
Interlock Monitor

Magnetron  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2M246-21CT
High Voltage Capacitor  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Capacitor: 1.0µF, 2.1 KV AC
High Voltage Diode  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Diode; 350mA, 9.0 KV
Cook top Lamp  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 125 V, 20 W
Cavity Lamp  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 125 V, 20 W
Timer  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Digital, up to 99 mim. 99 sec. (in each cooking stage)
Tray  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Tempered Safety Glass
Overall Dimensions  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29

15

/

16

"(W)x16

7

/

16

"(D)x15

3

/

8

"(H)

Effective Capacity of Oven Cavity  - - - - - - - - - - - - - - - - - - - - - - - 1.7 Cu.ft.
Accessories  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Owner’s Manual & Cooking Guide, Installation Manual,

Exhaust Adapter, Exhaust Damper, Mounting Kit and Two
Filters, Rotating Ring Assembly, Metal Rack, Drip Pan.

SPECIFICATIONS

Содержание AMV6177AAB

















































Отзывы:

Нет отзывов