Amana AMH20, Руководство по обслуживанию

Страница: 53 / 53

©2006 Maytag Services
16023463 B–3
Quick Refence Guide

2004 Amana Commercial Products
Amana, Iowa 52204
Part No. 12878401
Printed in U.S.A. 06/04
?
Can I change an option?
Options such as single or double digit pad programming and beep
volume can be changed to suit individual preferences.
To change options, STANDBY must display. If STANDBY is not
displayed, press PREHEAT ON/OFF pad.
1. Press HIDDEN pad.
• Pad is unmarked and located to the immediate left of PREHEAT ON/
OFF pad.
• Nothing will be displayed when HIDDEN pad is pressed.
2. Press PROGRAM SAVE pad.
•
0P:--
displays. Oven is now in options mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5. Press PROGRAM SAVE pad to save changes.
• To change additional options, repeat steps 3 - 5.
• Changes take affect after PROGRAM SAVE pad is pressed.
6. Press STOP/RESET to return to STANDBY, or open and close oven door.
Refer to Product Safety Manual for Safety Statements
Quick Start Reference Guide
CLEAN FILTR CLEAN FILTR
CLEAN FILTR CLEAN FILTR CLEAN FILTR
This oven displays
CLEAN FILTR
every 7 days. When the message
displays, Amana recommends
cleaning the air filter thoroughly.
Cleaning the air filter will not shut
off the message.
The message will
automatically stop displaying after 24
hours. Depending on microwave use
and environmental conditions, the
filter may need to be cleaned more or
less frequently. Once the frequency
is determined, set the option for the
appropriate time frame.
Air filter and vents must be cleaned
regularly to prevent overheating of the
oven. Refer to Owner’s Manual for
complete cleaning instructions.
Numbered Pads Display Options (Factory Settings in Bold)
1
Preprogrammed Pads
OP:10
OP:11
Allows 10 (0-9) preprogrammed digit pads.
Allows 100 (00-99) preprogrammed digit pads.
2
Manual Time Entry
OP:20
OP:21
Manual time entry/cooking not allowed
Manual time entry/cooking allowed
3
Reset to READY mode
OP:30
OP:31
Opening oven door does not reset oven back to ready mode
Opening oven door resets the oven back to ready mode
4
Keybeep
OP:40
OP:41
Keys do not beep when pressed (keybeep off)
Keys beep when pressed (keybeep on)
5
Keybeep Volume
OP:50
OP:51
OP:52
OP:53
Keybeep volume OFF
Keybeep volume low
Keybeep volume medium
Keybeep volume high
6
Food Done Signal
OP:60
OP:61
OP:62
OP:63
Food done signal is a continuous beep until reset by user
Food done signal is a three second beep
Food done signal is four beeps, continuously.
Food done signal is four beeps, four times
7
Keypad Time Entry
OP:70
OP:71
OP:72
OP:73
Keypad time entry window is 15 seconds
Keypad time entry window is 30 seconds
Keypad time entry window is one minute
Keypad time entry window is two minutes
8
Temperature Warnings
OP:80
OP:81
OP:82
OP:83
Both temperature warnings off
Warning only when preheat temperature does not match preprogrammed temperature
Warning only when actual oven cavity temperature is not to preheat temperature
Both temperature warnings on
TEMP PAD (b)
Temperature Scale
OP:b0
OP:b1
°F
°C
°C is default in 50 Hz International models
STAGE PAD (E)
Clean Filter Message
OP:E0
OP:E1
OP:E2
OP:E3
Do not display message
Display message for 24 hours every 7 days
Display message for 24 hours every 30 days
Display message for 24 hours every 90 days
POWER LEVEL (A)
Altitude Adjustment
OP:A0
OP:A1
Use at an elevation below 5,000 ft.
Use at an elevation of 5,000 ft. or above