background image

Service Specifications   

Bottom Mount Refrigerator

Technical Information 

AFD2535DEB AFD2535DEB0, AFD2535DEQ AFD2535DEQ0,  
AFD2535DES AFD2535DES0, AFD2535DEW AFD2535DEW0, 
MFD2560HEB MFD2560HEB0, MFD2560HEQ MFD2560HEQ0,  
MFD2560HES MFD2560HES0, MFD2560HEW MFD2560HEW0 

 

!

WARNING

 

To avoid risk of electrical shock that can cause death or severe personal injury, disconnect unit from power before 
servicing unless tests require power. Discharge capacitors through a 10,000-ohm resistor before handling. Wires 
removed during disassembly must be replaced on correct terminals to ensure proper grounding and polarization. 

Due to a possibility of personal injury or property damage, always contact an authorized technician for  
service or repair of this refrigerator. 

3.  Release the refrigerator door light switch. 
4.  The control will display Fd to confirm entry into the Forced Defrost Mode. 

 

 

Freezer Refrig

CAUTION

!

 

erator 

 

All safety information must be followed as provided in Service Manual 16022769. 

5.  Entry is confirmed by pressing the Refrigerator Down 

 

 key once more. The unit is off and in the Defrost Mode. 

Note: 

All control functions will be turned off (Compressor, Defrost, Evaporator Fan, the damper will  

remain in its current position). 

!

WARNING

 

6.  The control will default to the short run period test as shown here: 

 

Freezer Re

 

frigerator 

 

To avoid risk of electrical shock that can cause death or severe personal injury, disconnect unit from power before  
servicing unless testing is required. Discharge capacitors through a 10,000 ohm resistor before handling. Wires  
removed during disassembly must be replaced on correct terminals to ensure proper grounding and polarization. 

Note: 

You can toggle between the (S)hort and (L)ong test mode by pressing the Refrigerator UP 

 

 Key. 

Long Test mode is used for factory test and should not be used in the field. 

 

Freezer Refrigerat

No-Load Performance, Controls in Normal Position 

 

 

Kw/24 hr 

±

0.4 

 
 

Percent Run Time 

±

10% 

 
 

Cycles/24 hr 

±

25% 

Refrigerator Center 

Compartment 

Average Food 

Temperature 

±

3

°

 

Freezer Compartment 

Average Food 

Temperature 

±

3

°

Ambient 

°

70

°

       90

°

       110

°

 

   70

°

    90

°

       110

°

 

 

70

°

       90

°

       110

°

 

  70

°

       90

°

         110

°

70

°

        90

°

        110

°

 

25 cu ft 

1.0       1.60        2.3 

28          48         65 

35          39           25 

38          36          35 

0           0            0 

 

 

 

or 

 

7.  Once the desired mode is displayed, confirm the forced defrost by pressing the Refrigerator 

 

down Key once. 

The defrost will begin immediately and the display will return to a normal operating display with set point values. 

 

Freezer Refrigerator 

 

 

Temperature Relationship Test Chart 

 

 

Evaporator 

Outlet 

±

3

°

 

Evaporator 

 Inlet 

±

3

°

 

Suction Line 

±

7

°

 

Average Total 

Wattage 

±

10% 

Suction 

Pressure 

±

2 PSIG 

 

Head Pressure

±

 5 PSIG 

Ambient 

°

F

 

  70

°

              90

°

 

 

 

 

70

°

             90

°

 

   70

°

              90

°

70

°

             90

°

70

°

             90

°

70

°

              90

°

 

25 cu ft 

-20                -17 

-20                -17 

85               105 

135               140 

6"(Vac.)       0 

87               137 

8.  Close the Refrigerator door(s). You are in the defrost mode 

Note:

 Forced Defrost mode can be exited at any time prior to step 7 by closing the Refrigerator Door(s). 

Service Test Mode: 

The service test functions are performed using the refrigerator display and keypad. Enter the Service Test Mode  
by performing the following sequence of events: 

1.  Hold the refrigerator door light switch closed. 

Schematic 

2.  Press the Refrigerator Temperature Up 

 

 keypad 3 times consecutively. 

Note:

 The 3 Keystrokes must be done consecutively and within 10 seconds. 

 

3.  Release the refrigerator door light switch. 
4.  The control will display SE to confirm entry into the service mode. 

 

Freezer Re

frigerator 

 

 

5.  Entry to the Service Menu is confirmed by pressing the Refrigerator Up 

 key once more. 

6.  The control will display its software version for 3 seconds. 

 

Freez

er Refrigerator 

 

7.  Following the software revision display the freezer display will read the first test number in the  

diagnostic tree. The refrigerator display will be blank. 

 

Freezer

 Refrigerator 

 

 

Note: 

All control functions will be turned off (Compressor, Defrost, Evaporator Fan, the damper will  

remain in its current position). 

8.  You are now in the SERVICES TEST operational mode and may use the diagnostic tests. 

The Service Test Mode can be exited at any time by closing the Refrigerator Door(s). 

 

April 2004 

16023133 

April 2004 

16023133 

© 2004 Maytag Services 

© 2004 Maytag Services 

 

 

Содержание AFD2535DEB

Страница 1: ...or Center Compartment Average Food Temperature 3 F Freezer Compartment Average Food Temperature 3 F Ambient F 70 90 110 70 90 110 70 90 110 70 90 110 70 90 110 25 cu ft 1 0 1 60 2 3 28 48 65 35 39 25 38 36 35 0 0 0 or L 7 Once the desired mode is displayed confirm the forced defrost by pressing the Refrigerator down Key once The defrost will begin immediately and the display will return to a norma...

Страница 2: ... PE to confirm entry into the programming mode Freezer Refrigerator P E 4 Entry is confirmed by pressing the Freezer Down key once more Note All control functions will be turned off Compressor Defrost Evaporator Fan the damper will remain in its current position 5 The control will display the current Program Code This value should be validated with the Program Code printed on the unit serial plate...

Страница 3: ...ter is not powered To avoid moisture from condensing on the fresh food mullion the energy switch should always be in the Off position This test also allows observation and measurement of proper defrost function You can observe defrost heat and voltages while the test is activated 1 Freezer Refrigerator O DEFROST THERMOSTAT OPEN Freezer Refrigerator 1 S DEFROST THERMOSTAT SHORTED CLOSED Service Tes...

Страница 4: ...sconnect unit from power before servicing unless tests require power Discharge capacitors through a 10 000 ohm resistor before handling Wires removed during disassembly must be replaced on correct terminals to ensure proper grounding and polarization Service Test 6 Open Damper Test When selected this test will indicate the current position O C OPEN CLOSED of the refrigerator damper The Refrigerato...

Отзывы: