7
Reverse Center Hinge
1.
Remove the three dome caps and screws from the handle
side and use them to fill the holes created when the hinge
screws were removed.
2.
Using the three
⁵⁄₁₆
" hex-head hinge screws, removed in
Step 1
,
insert two screws halfway into the holes, leaving
space to insert the center hinge.
3.
Once the refrigerator door is in place, slide the center hinge
from the right onto the screws, insert the third screw, and then
tighten all screws completely.
NOTE:
Make sure the washers are in place on both the top
and bottom pins of the center hinge.
Reverse Freezer Door
1.
Remove the three cabinet hole plugs from the top of the
cabinet and place them in the hinge holes on the opposite
side.
2.
Remove the door stop from the bottom of the freezer door.
3.
Move the door stop to the opposite side, making sure that the
hole in the door stop plate is aligned perfectly with the hole for
the center hinge pin.
4.
Using the screw removed in Step 2, fasten the door stop to
the bottom of the freezer door.
5.
Set aside the freezer door until the hinges and refrigerator
door are in place.
Reverse Refrigerator Door
1.
Remove the door stop from the bottom of the refrigerator
door.
2.
Replace the door stop on the opposite side of the refrigerator
door, making sure that the hole in the door stop plate is
aligned perfectly with the hole for the bottom hinge pin.
3.
Fasten the door stop to the door.
4.
Remove door hinge hole plug from freezer door. Move to
opposite side.
5.
Set aside refrigerator door until bottom hinge is installed on
the opposite side of the refrigerator.
A. Dome cap washers
B. Hex-head hinge screws
C. Dome caps
A.
⁵⁄₁₆
" Hex-head hinge screws
B. Washers
A
B
C
A
A
B
A. Door stop screw
B. Door stop
A. Door stop screw
A. Door stop screw
B. Door stop
A
A
B
A
A
B
