Amada MM-122A, Руководство по эксплуатации, Страница: 9 / 20

MA-716A
3. Connection
3-5
② Starting the Checking Software
Click the Start button at the lower left portion of the screen and select
[Program]
→ [MIYACHI] → [MM-122A-Test]. The communication- checking
software starts.
(Remarks)
(a) Communication port No.
(b) Transmission rate
(c) Communication
(Displays the state of communication)
(d) Data (Displays the received data)
(e) End (Ends the checking software)
(f) Clear (Clears display)
③ Setting the Checking Software
Set the communication port No. and the transmission rate.
•
Set the communication port No. connected with the communication cable
for [Communication port No.].
If [!!ERROR!!] is displayed for [Communication] when setting,
・
the communication port is used by other software or the like, or
・
the communication port is set to be unusable.
End the software and check the settings of PC
*1
.
•
Set the transmission rate set to the MM-122A in
②
(9600bps) for
[Transmission rate].
*1: See the operation manual for PC you use.
(a)
(b)
(c)
(d)
(f)
(e)