SRP-IV
- 9 -
4. Printer Status
◎
Power LED
Status
Description
Power LED is “On”
Power light is “Green LED “and Printer is ready to work
Power LED is ”Off”
Power Supplier is not connected with printer or Power
switch is off.
◎
Error LED
Status
Description
ERROR LED is “On”
Paper is not loaded properly or no paper.
Printer top cover is not closed properly.
◎
MSR reading
Status
Description
ERROR LED flashes one time and
buzzers one time
Card reading is Good
ERROR LED flashed two times
and buzzers two times
Card reading is Bad
5. Troubleshooting
This chapter gives solutions to some printer questions you may have.
◎
The lights on the control panel do not come on.
Make sure that the power supply cables are correctly plugged into the printer, the power unit,
and to the power outlet.
◎
The ERROR light is “ON”
1) Make sure that the printer top cover is properly closed. If the ERROR light is still “ON”
although printer top cover is closed properly, contact a qualified service person.
2) The paper roll is not installed. Install a new paper roll.