AM.PM Sensation W30A-170-075W-A, Руководство пользователя

Страница: 2 / 16

2
English
Installation
instruction
Attention! The product is delivered
in disassembled form, with separate
articles!
Attention! Installation of the ware
should be carried out by two qualified
specialists.
The dimensions on the drawings are
indicated in mm. Deviation of the actual
size of acrylic components, relative to
the declared on the d/-7 mm
per 1 linear meter. Dimensions of the
room for the installation of the bathtub
should provide technological gaps +5
mm from each side of the bathtub (for
the linear expansion of plastic under
the influence of temperature/weight of
water).
Bath installation
requirements
Installation of the bath without a frame,
as well as with a modified frame is not
allowed. The legs are used to set the
level of the bath and adjust the gap
between the bath panel and the floor.
The bathtub should be installed on all
legs of support to eliminate uneven
distribution of load and, as a result, the
appearance of micro-cracks in the body
of the bathtub.
During installation of the bath it
is recommended to avoid dirt and
construction dust on the surface of the
bath. Becaus it may lead to scratches
on the surface of the bath, during non-
professional cleaning.
Installation kit
• Acrylic bathtub (without installation kit)
purchased separately
• Metal frame (with installation kit)
purchased separately
• Front panel (with installation kit)
purchased separately
• Container with a lid
purchased separately
• Drain-overflow for bathtub
purchased separately
• Side panel (with installation kit)
• Not available to purchase