ALZRC DEVIL 380 FAST, Инструкция по эксплуатации, Страница: 5 / 38

4
自备设备 EQUIPMENT REQUIRED FOR ASSEMBLY
自备遥控及电子设备 RADIO TRANSMITTER AND ELECTRONIC EQUIPMENT REQUIRED FOR ASSEMBLY
● 遥控器 (六通道以上直升机模式遥控器)
● 接收器 (六通道以上)
● 数字螺距规
● 锂电池
(1500~2600mAh 22.2V 6S Li-Po ) 宽高尺寸限制在 43x43mm 以内 。
● 无刷马达 (1000KV 5.0mm 6S ) / 标准版配备 高级套装版配备
● 无刷电调 (50~80A) / 标准版配备 高级套装版配备
● 倾斜盘舵机 x 3 ( 建议使用扭力 3KG*cm 以上舵机 ) 高级套装版配备
● 锁尾舵机 ( ) 建议使用扭力 4Kg * cm 以上、速度 0 . 06 ~ 0 . 04 秒舵机 高级套装版配备
● 无副翼陀螺系统 高级套装版配备
● Transmitter (6-channel or more, helicopter system)
● Receiver (6-channel or more)
● Digital Pitch Gauge
● Li-Po Battery (1500~2600mAh 22.2V 6S ) With the size within 43x43mm.
● Brushless Motor (1000kv 6S 5mm spindle) Combo / Super Combo
● Brushless ESC (50~80A) Combo / Super Combo
● Swashplate Servos x 3 (Recommend to use 3KG*cm or higher torque servo) Super Combo
● Locked Rudder Servo ( ) Recommend to use above 4kg*cm torsion and with speed of 0.06 ~ 0.04s servo Super Combo
● 3-Axis Gyro System Super Combo
自备工具 ADDITIONAL TOOLS REQUIRED FOR ASSEMBLY
● 内六角螺丝刀 (1.5mm/2.0mm/2.5mm)
● 内六角套筒 (5.5mm/7.0mm)
● 243 螺丝胶
● 648 轴承胶
● Grease 润滑油
● CA 瞬间胶
● Hexagon Screw Driver (1.5mm/2.0mm/2.5mm)
● Hex Fork Wrench (5.5mm/7.0mm)
● 243 Thread Lock
● 648 Anaerobics Retain
● Grease
● CA Glue
● 剪刀
● 刀子
● 斜口钳
● 尖嘴钳
● 砂纸
● 焊接工具
● Scissors
● Cutter Knife
● Diangonal Cutting Pliers
● Needle Nose Pliers
● Sand Paper
● Soldering Equipment
包装说明 PACKAGE ILLUSTRATION