Specifications and Technical Data sheet
Model
Rated
Voltage
Cable
Length
Rated
Power
IP
Rating
Chip and
Lumination
Beam
Angle
199245
220-240V
50Hz
1.5M
1X30W IP65
1PC
2300LM
120
°
Before using this product, please read the instruction manual carefully and check if there are
some damaged components. If you notice any damage, the product cannot be installed.
Retain this information for future reference.
Security Warning
：
：
：
：
Do not look directly at lighted floodlight.
Never operate the floodlight with wet hands or if you are staying on wet ground.
Keep the light away from environment with existing danger of explosion,
flammable surfaces and objects. Danger!!!
Keep this product out of reach of children or any unauthorized persons.
Installation and maintenance and repair should be done by a qualified electrician.
Do not mount the unit in the ceiling or on a mast(polo).
Before using the device, make sure that all screws are properly tightened.
Always disconnect the power, unplug before working at.
The minimum distance of the illuminated surface is 0.5m.
Do not use the projector without a properly installed safety glass.
Whenever the glass breaks, it should be replaced immediately.
If the power cable became gray or find any changed of outside, please contact
with seller or professional people to repair.
The grounding screw must be tightened.
Installation
Slide the stand into this lamp bracket. Align the holes in the bracket and the stand. Insert and
tighten angle adjustment screw knob. To alter the angle of this lamp, simply loosen the angle
adjustment screw knob, pivot this lamp until the desired angle is achieved and re-tighten knob.
Check this lamp are secure and that the stand is stable and has a firm footing. Ensure cable is
not catching on any sharp object and that the mains plug connection is adequately protected
against rain or moisture. Your lamp is now ready for use.
