Aly James Lab VSDS-X SIMMONS DRUMS EXTENDED VST, Руководство пользователя

Страница: 37 / 41

First
SELECT DRUM must be set to the drum you want to customize.
Then engage the LEARN MODE by clicking on the LEARN button (when engaged a blue LED will be
lit), now each new incoming MIDI note will be assigned to that drum (2 notes are available per drum,
excepted the hihat which got 2 for closed and 1 for open)
While still in learn mode you can change the SELECT DRUM to assign another drum. Once you are
done, click
LEARN button again to disengage the LEARN MODE. The custom map is now in memory.
If you want to save your map permanently so it will be used each time you load the plugin click SAVE .
To get back at the default mapping any time click RESET .
The RAW memory can be viewed in the RAW HEX DATA memory box (those are Hexadecimal
numbers)
Prom Voice
You can now select between ULAW (companded) and LINEAR PCM formats, specifying the size is not
needed anymore. Since v2 the EPROM part will also pass through the SSM filter (you can use one of
the three options of the NOISE knob acting line the HIHAT or CYMBAL module, left close the filter
following the decay, middle position got the filter always open, right starts closed an open following
the decay)