Aly James Lab VSDS-X SIMMONS DRUMS EXTENDED VST, Руководство пользователя

Страница: 30 / 41

Control Voltage Curve
The internal control voltage can be tweaked in VSDSX, it is normally a linear behavior but you can
also set it to a logarithmic behavior. This will change the way the voltage from the envelopes is
send the VCAs and change the resulting sound behavior.
SSM2044 Sensitivity
As seen previously the trigger velocity can affect the VCF cutoff , this sensitivity setting will let you
fine tune the amount of voltage applied to the VCF cutoff.
The normal behavior is to set it fully clock wise but you can reduce the amount for a less
responsive filter and a more linear response if needed.
Note that the VCF also affect the Click so you will notice that the sound gets duller while you
decrease the sensitivity.
A basic setting to understand how it works is to set the sensitivity fully clock wise and the noise filter
knob at 12 o’clock. When hit hard (velocity 127) the cutoff will be like if you have set the noise filter
knob to near max, if the trigger velocity is very low the cutoff will be near the knob setting point. So
the harder you hit the brighter the noise/click source will be, depending on the noise filter setting .