- 8 -
Outdoor Unit LEDs - BU
Name
Description
Functionality
W-
LINK
Wireless Link
traffic
Indication
Green – Unit is associated
with an RB
Blinking red – Unit is not
associated
Off – Wireless link is
disabled
Status
Self-test and
power
indication
Green: Power is available
and self-test passed.
Blinking Amber: Testing
(not ready for operation)
Red: Self-test failed. Fatal
error
ETH
Ethernet
activity/
connectivity
indication
Green: Ethernet link
between the indoor and
outdoor units is detected
Red: No Ethernet
connectivity between the
indoor and outdoor units.
SNR
bar
Received
signal
strength
Indication
Red LED: Signal is too low
(SNR < 4dB).
8 green LEDs: Quality of
the received signal.
Orange LED: Signal is too
high (SNR > 50dB).
Electronic Emission Notice
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
a. This device may not cause harmful interference.
b. This device must accept any interference received, including
interference that may cause undesired operation.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to EN300385 rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential
environment notwithstanding use in commercial, business and
industrial environments. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
FCC Radiation Hazard Warning
To comply with FCC RF exposure requirement, the antenna used
for this transmitter must be fixed-mounted on outdoor permanent
structures with a separation distance of at least 2 meter from al
persons.
