Alvarion BreezeACCESS SU-M, Руководство по установке

Страница: 16 / 28

BreezeACCESS SU-M Installation Guide
3-2
Introduction
After completing the installation process, as described in the preceding
chapter, the basic parameters must be configured to ensure that the
SU-M operates correctly. Once the basic parameters have been
configured, additional parameters can be remotely configured via either
the Ethernet port or the wireless link using Telnet, TFTP or SNMP
management.
Parameters can be configured using either of the following alternatives:
To access the Monitor Program
using Telnet:
Connect a PC to the Ethernet port, using a straight Ethernet cable.
Before running the Telnet program, configure the PC’s IP parameters to
enable connectivity with the unit. The default IP address is 10.0.0.1.
To configure parameters using
BreezeCONFIG ACCESS:
Connect a PC to the Ethernet port, using a straight Ethernet cable.
Run the BreezeCONFIG program. You can use the Set IP tool of
BreezeCONFIG to configure the IP parameters (IP Address, Subnet
Mask and Default Gateway Address) based on the unit’s MAC Address
which is marked on the front panel of the unit.
Refer to BreezeACCESS II System Manual for more information on
accessing and using the Monitor program and on configurable
parameters. Refer to the BreezeCONFIG ACCESS User’s Manual for
more information on using BreezeCONFIG for configuring parameters.
Configuring Basic Parameters
The Basic Configuration menu in the Monitor program includes all the
parameters necessary for the initial operation of BreezeACCESS SU-M.
In many installations, most of these parameters should not be changed
from their default values. The following list includes the basic
parameters and their default values: