Alvarion BreezeACCESS SU-M-900, Руководство по установке

Страница: 28 / 34

BreezeACCESS SU-M-900 Installation Guide
3-4
Parameter Default Value Comment
Manual Sequence Definition Applicable only when
Scrambling Mode is
configured to Manual
Scrambling and HDM Mode
in the AU is disabled.
Scan Entire Band Enable It is recommended to
disable if the roaming scan
feature is enabled (see
Changes in HDM/Flexible
Hopping Definition
Parameters, on page 3-10).
Scan Entire Sub Band Disable It is recommended to
enable if the roaming scan
feature is enabled (see
Changes in HDM/Flexible
Hopping Definition
Parameters, on page 3-10).
Transmit Level 24 dBm Retain the default setting.
VLAN Link Type Hybrid Link
VLAN ID – Management 65535
Best AU Support Disable Retain the default setting.
Preferred AU MAC Address 00-00-00-00-00-00
(none) Retain the default setting.
Applicable only when Best
AU Support is enabled.
Scanning Mode Active
Max TX Data 3 Mbps Set to 2 Mbps to improve
throughput by limiting
maximum rate to be used
by the multi-rate algorithm
Authentication Algorithm Open System Can be changed to Shared
Key only after configuring
the WEP Key and the
Default Key ID
Default Key ID 1
WEP Key 1-4 0000000000 (none)
Encryption Seed 7
Encryption Polynom Index 0