WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
Network
72
3.5.1.2.6
Static Leases
In this section, you can specify IP addresses to be allocated by the DHCP server to particular DHCP
clients. Static leases are applicable only when the DHCP Server is enabled (
Ignore interface
is
unchecked). The IP addresses to be allocated as static leases should belong to the configured network.
However, if
Dynamic DHCP
is enabled, than IP addresses in the range configured for dynamic allocation
by the
Start
and
Limit
parameters should not be used for static leases.
A static lease entry include the following parameters:
Hostname
: An optional symbolic name to be assigned to the device.
MAC-Address
: The device’s MAC address (use the format xx:xx:xx:xx:xx:xx).
IPv4-Address
: The static IP address to be assigned to the device.
3.5.2
Wifi Pages
Click on the Wifi option to open the
. In addition, the third-level tabs are
revealed under the Wifi tab, one tab for each of the defined wireless networks (SSIDs), enabling to open
the applicable
.
3.5.2.1
Wifi Wireless Overview Page
The Wireless Overview page includes the following sections:
(if available)
3.5.2.1.1
Wireless Adapter 802.1bgn
The Wireless Adapter 802.11bgn section provides general configuration and status details for the 2.4
GHz radio as well as some general configuration and status details for each of the configured wireless
networks. It also includes some buttons enabling general management of the radio and its wireless
networks.
Figure 3-52: Network Per Interface Page, Static Leases Section
Содержание 43222600
Страница 1: ...System Manual WBSn 2400 and WBSn 2450 Software Version 2 0 June 2015 P N 216066...
Страница 11: ...Chapter 1 Introduction In This Chapter WBSn System Description on page 2 Specifications on page 3...
Страница 127: ...Appendix B Preparing Ethernet Cables In this Appendix Preparing the Base Station s Ethernet Cable on page 116...