Aluratek WMQ137AM, Руководство пользователя

Страница: 45 / 47

• Keep your product at least 3-6 feet away from electrical devices that generate RF noise.
Examples include: microwaves, monitors, electric motors, and so forth.
5. I just do not remember my encryption key. What should I do?
• If you forgot your encryption key, the WiFi card will be unable to establish a proper connection.
If an encryption key setting has been set for the Wireless WAN Mobile Broadband Router, it
must also be set for the WiFi card that will connect to the Wireless WAN Mobile Broadband
Router.
To reset the encryption key(s), login to the Wireless WAN Mobile Broadband Router using a
wired connection. (Please refer to “Basic > Wireless (Security–No Encryption)” on page 10, for
additional information).
7. How do I reset my Wireless WAN Mobile Broadband Router to its factory default
settings?
If other troubleshooting methods have failed, you may choose to Reset the Wireless WAN
Mobile Broadband Router to its factory default settings.
To hard-reset the Wireless WAN Mobile Broadband Router its factory
default settings, follow
the steps listed below:
1. Ensure the Wireless WAN Mobile Broadband Router is powered on
2. Locate the
Reset button on the back of the Wireless WAN Mobile Broadband Router.
3. Use a paper clip to press the Reset button.
4. Hold for 10 seconds and then release.
5. After the Wireless WAN Mobile Broadband Router reboots, it is reset to the factory
default
settings.
Note:
Please note that this process will take a few minutes.
8. What is VPN?
• VPN stands for “Virtual Private Networking.” VPNs create a "tunnel" through an existing
Internet connection using PPTP (Point-to-Point Tunneling Protocol) or IPSec (IP Security)
protocols with various encryption schemes including Microsoft Challenge Handshake
Authentication Protocol (MS-CHAP) .
• This feature allows you to use your existing Internet connection to connect to a remote site with
added security. If your VPN connection is not functional, verify that your VPN dial-up
configuration is correct.
Note: This information should be provided to you from your VPN provider.
Pressing the Reset Button restores to its original factory default settings.
9. What can I do if my Ethernet cable does not work properly?
• First, ensure that there is a solid cable connection between the Ethernet port on the Router, and
your NIC (Network Interface Card).
• Second, ensure that the settings on your NIC adapter are “Enabled,” and set to accept an IP
address from the DHCP.
• If settings appear to be correct, ensure that you are not using a crossover Ethernet cable.
Although the Wireless WAN Mobile Broadband Router is MDI/MDIX compatible, not all NICs
are. Therefore, it is recommended that you use a patch cable when possible.
Technical Support 45