Aluratek WMQ137AM, Руководство пользователя

Страница: 39 / 47

Advanced Setup > Advanced Setting > Performance
Beacon Interva
llll
Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a
Beacon interval value between 1 and 1000. The default value is set to 100 milliseconds.
DTIM interva
llll： ： ： ：
Enter a value between 1 and 65535 for the Delivery Traffic Indication Message (DTIM). A
DTIM is a countdown informing clients of the next window for listening to broadcast and
multicast messages. When the Access Point has buffered broadcast or multicast
messages for associated clients, it sends the next DTIM with a DTIM Interval value. AP
clients hear the beacons and awaken to receive the broadcast and multicast messages.
The default value for DTIM interval is set to 3
Wireless mode
Select wireless connection mode for wireless connection
TX Rate
ssss
Slect the basic transfer rates based on the speed of wireless adapters on the WLAN
(wireless local area network).
SSID Broadcast
Choose enable or disable the wireless SSID broadcast.
By turning off the broadcast of the
SSID ,it is possible to make your wireless network nearly invisible.
Speed Enhanced Mode
This is Tx Brust function for Ralink wireless solution
Antenna Transmit Power:
Select the Transmit Power of the Antenna
Click on “Save” to store what you just select or “Undo” to give up