- 12 -
4
x2 BIP
Press the "P2” button twice of the
already programmed transmitter
and you will hear an acoustic signal
(x2 BIP)
Press the ”P2” button of the
new transmitter
After correct programming
the motor will make a move
DOWN and UP
3. Memorizing another transmitter
OK
4. Programming the limit positions
Upper limit position
Press the “UP” button
When the required upper
position is reached press
and hold “STOP” button
for 6 seconds.
Motor will make a move
DOWN and UP
The upper limit position has been set.
Proceed to set the lower limit position.
OK
Lower limit position
Press the “DOWN” button
When the required lower
position is reached press
and hold “STOP” button
for 6 seconds.
Motor will make a move
DOWN and UP
The lower limit position has been set.
Motor will automatically goes out from the
set-up mode and is ready to regular using.
OK
x1 BIP
Press the "P2" button
and you will hear an acoustic
signal (x1 BIP)
x1 BIP
Press the "UP" button
and you will hear an acoustic
signal (x1 BIP)
x1 BIP
Press the "P2" button
and you will hear an acoustic
signal (x1 BIP)
Motor will make a move
DOWN and UP
I – manual settings of limit positions
